Difference between revisions of "PCR Amplification of DNA"
From Bridges Lab Protocols
(updated) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 9: | Line 9: | ||
==Protocol== | ==Protocol== | ||
*Use the following volumes per reaction | *Use the following volumes per reaction | ||
| − | ::* | + | ::*12.5 uL DreamTaq |
| − | ::* | + | ::*7.5 uL RNAse-Free water |
| − | + | ::*5.0 uL Working stock Primer (of 0.4-1uM stock solution in water (both primers combined)) | |
| − | + | ||
| − | + | ==PCR Program== | |
| − | : | + | *For animals: use programs denoted in [[Genotyping Program]] |
*Run PCR Program (approx 3.5 to 4 hours). Normally use touchdown PCR ('''DAVETD''') as follows: | *Run PCR Program (approx 3.5 to 4 hours). Normally use touchdown PCR ('''DAVETD''') as follows: | ||
Latest revision as of 16:57, 8 June 2020
Contents
SOP
Materials
- Primers – order from IDT prediluted to 100 mM in TE. Make working solution of 0.4uM-1 uM (100x) in water with both sense and antisense primers combined (300uL water, 3uL of each primer)
- DreamTaq Green PCR Master mix - contains dNTPs, polymerase, salts, and buffer with loading dye https://www.thermofisher.com/order/catalog/product/K1081?ICID=search-product#/K1081?ICID=search-product
- RNAse-Free water - comes in DreamTaq kit
Protocol
- Use the following volumes per reaction
- 12.5 uL DreamTaq
- 7.5 uL RNAse-Free water
- 5.0 uL Working stock Primer (of 0.4-1uM stock solution in water (both primers combined))
PCR Program
- For animals: use programs denoted in Genotyping Program
- Run PCR Program (approx 3.5 to 4 hours). Normally use touchdown PCR (DAVETD) as follows:
- 1 min at 94
- 30s at 65
- 2 min/kb at 72
- 30s at 94
- 30s at 63 then -0.5/cycle
- 2 min/kb at 72
- Repeat steps 4-6 28 times
- 30s at 94
- 30s at 45
- 11 min at 72
- Hold at 4 until ready
- Purify PCR product if necessary using Qiagen kit (Add 5x PB)
