Quantification of miRNA by SYBR Green qPCR

From Bridges Lab Protocols
Revision as of 19:01, 10 January 2017 by Davebridges (Talk | contribs) (Added RNA tailing)

Jump to: navigation, search


see SOP - Chloroform for safety information about working with Chloroform.

This is adapted from Yang et al 2010

Materials

  • Purify total RNA, via the protocol: Purification of miRNA and mRNA with TRIzol
  • PolyA polymerase (NEB cat# M0276S)
  • Phenol/Choroform mixture (1:1 ratio)
  • 3M Sodium acetate pH 5.2
  • Isopropanol
  • Superscript III reverse transcriptase (Life Technologies Catalog # 18080093)
  • Oligo dT Adapter Primer 5'GCGAGCACAGAATTAATACGACTCACTATAGGTTTTTTTTTTTTVN-3, dissolved to 50 uM
  • dNTP Mixture (10 mM of each)
  • Reverse Adapter Sequence 5'GCGAGCACAGAATTAATACGACTCAC-3
  • Mature miRNA Primer

Protocol

PolyA Tailing of RNA

  • Incubate at 37°C for 1 hour. Components include
    • 1 ug RNA
    • 2 uL 10X polymerase reaction buffer
    • 2 uL ATP (10 mM, comes with polymerase)
    • 1 uL poly(A) polymerase
    • ddH2O to a final volume of 20 uL
  • Add 160 uL Water, 20 uL of 3 M sodium acetate, pH 5.2 and 200 uL of phenol/chloroform to tailed RNA, mix by tapping to form an emulsion
  • Centrifuge for 1 min on max to separate layers
  • Transfer the upper (aqueous) layer to a clean tube. Add 200 uL chloroform and mix, spin and extract aqueous layer to a new tube twice to remove the excess phenol
  • Add 140 uL of isopropanol, mix and incubate 5 minutes. Centrifuge 15 minutes on max. Aspirate supernatant being careful not to touch the pellet and air dry for 5-10 mins
  • Reedissolved in 25 μL of water

Reverse Transcriptase

  • Reverse-transcribed into first-strand cDNA using Superscript III transcriptase (Invitrogen) with the oligo-dT adapter primer
  • Add to a PCR tube (this is per reaction):
    • 1 uL of Oligo dT Primer
    • 1uL of dNTP
    • 6uL of tailed RNA
    • 5 uL Sterile water
  • Heat at 65C for 5 minutes
  • Briefly centrifugre then add (per reaction):
    • 4 uL 5X First Strand Buffer
    • 1 uL 0.1M DTT
    • 1 uL RNAseOUT
    • 1 uL of Superscript III RT
  • Mix gently by pipetting and place in the PCR machine for the following program:
    • Incubate at 50C for 60 min
    • Inactivate by heating at 70C for 15 min

qPCR

  • Try 50ng of cDNA was as a template in each reaction (1/10th of the cDNA mixture).
  • The reverse primer was from the adapter sequence: 5'GCGAGCACAGAATTAATACGACTCAC3' and the forward primers were specific to miRNA mature sequences.
  • The SYBR Green-based real-time PCR was performed to quantify miRNA expression, and U6 can be used for normalization.
  • Can use a protocol similar to the QPCR for mRNA quantification