Glycogen Determination from Tissues

From Bridges Lab Protocols
Revision as of 15:01, 6 May 2010 by Davebridges (Talk | contribs) (Wrote initial protocol)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Materials and Buffers

  • Screw Capped Vials
  • 30% KOH, prepared fresh
  • 1M Sodium Sulfate
  • Ethanol
  • 50 mM Sodium Acetate, pH 4.8
  • Amyloglucosidease

Protocol

  1. Weight out 30-90 mg tissue into screw cap vial and record weights.
  2. Add 300 uL 30% KOH and place on 95C heat block for 30 min with occasional mixing.
  3. Cool and then add 100 uL Sodium Sulfate and 800 uL Ethanol.
  4. Boil for 5 min.
  5. Centrifuge at 13 000 RPM for 5 min.
  6. Resuspend pellet in 200 uL water then add 400 uL ethanol. Boil 5 min, spin 5 min and Repeat wash steps twice more.
  7. Dry pellet
  8. Resuspend pellet in 200 uL of 50 mM Sodium Acetate, pH 4.8
  9. Add 0.3 mg/mL amyloglucosidase and place at 37C for 3h
  10. Quantify glucose

Reference:

PMID 15282316